Description
Yoke 211L Rotating Swivel Lifting Point with extended length metric thread
Perfect for lifting from the horizontal to the vertical when the lifting points are positioned on the sides of products
A Yoke 211L extended thread swivel rotating lifting point is suitable when the threaded section needs to pass through a deeper piece of material where a nut needs to be screwed on from the opposite end.
Thread length varies depending on the size of metric thread required
The size required can be determined from the SWL Chart below which shows the different types of lifting arrangements and the total safe working load possible for each lifting point size
Yoke Type 211 Lifting Point rotates through 360 Degrees and pivots 90 Degrees.
Extended Thread Length
Manufactured from alloy steel, quenched, tempered and tested in accordance with EN1677-1
Load rated parts are 100% magnaflux crack detected.
Individual forged parts and cap screw are traceable to Test Certification.
Bolts are Metric thread (ASME / ANSI B18.3.1M).
Proof tested to 2.5 times the WLL.
Fatigue rated to 1.5 times the WLL.
Design Factor 4 : 1
All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
211L Data sheet link below
YOKE 211 L Extended thread Lifting Point Data Sheet
| Part Code | WLL
tonnes |
Thread
M mm |
Thread
E mm |
Thread
Pitch DIN13 |
A
mm |
B
mm |
C
mm |
D
mm |
F
mm |
G
mm |
H
mm |
S
mm |
SW
mm |
Torque
in Nm |
Mass
kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8-211-003/105L | 0.3 | M8 | 76 | 1.25 | 30 | 35 | 35 | 10 | 85 | 55 | 29 | 6 | 13 | 30 | 0.3 |
| 8-211-006/125L | 0.63 | M10 | 96 | 1.5 | 30 | 35 | 36 | 10 | 85 | 55 | 29 | 6 | 17 | 60 | 0.4 |
| 8-211-010/150L | 1 | M12 | 114 | 1.75 | 33 | 37 | 44 | 14 | 98 | 57 | 36 | 8 | 19 | 100 | 0.6 |
| 8-211-015/185L | 1.5 | M16 | 149 | 2 | 33 | 37 | 46 | 14 | 98 | 57 | 36 | 10 | 24 | 150 | 0.7 |
| 8-211-025/230L | 2.5 | M20 | 186 | 2.5 | 50 | 54 | 57 | 17 | 140 | 82 | 44 | 12 | 30 | 250 | 1.7 |
| 8-211-040/265L | 4 | M24 | 221 | 3 | 50 | 54 | 59 | 17 | 140 | 82 | 44 | 14 | 36 | 400 | 2.1 |
| 8-211-050/340L | 5 | M30 | 278 | 3.5 | 60 | 65 | 81 | 23 | 170 | 99 | 62 | 17 | 46 | 500 | 4.3 |
| 8-211-080/300L | 8 | M36 | 222 | 4 | 77 | 85 | 101 | 27 | 225 | 124 | 78 | 22 | 55 | 800 | 7.3 |
| 8-211-100/350L | 10 | M42 | 272 | 4.5 | 77 | 85 | 104 | 27 | 225 | 124 | 78 | 24 | 65 | 1000 | 8.7 |
| 8-211-150/350L | 15 | M42 | 264 | 4.5 | 95 | 104 | 112 | 36 | 256 | 158 | 86 | 24 | 65 | 1500 | 13.1 |
| 8-211-200/385L | 20 | M48 | 295 | 5 | 95 | 104 | 120 | 36 | 259 | 158 | 90 | 27 | 75 | 2000 | 15.2 |
LIFTING POINT LONG BOLT WORKING LOAD APPLICATION FACTORS
 |
 |
 |
 |
 |
 |
 |
 |
||||
| Number of legs | Â | 1 | 2 | 1 | 2 | 2 | 2 | 3-4 | 3-4 | ||
| Load Direction | 0° |  0° |  90° |  90° |  0-45° |  45-60° |  unsymm. |   0-45° |  45-60° | unsymm. | |
| Part Code | Thread | WLL Tonnes | |||||||||
| Â 8-211-003/105L | M8 | 0.3 | 0.6 | 0.3 | 0.6 | 0.42 | 0.3 | 0.3 | 0.63 | 0.45 | 0.3 |
| Â 8-211-006/125L | M10 | 0.63 | 1.26 | 0.63 | 1.26 | 0.88 | 0.63 | 0.63 | 1.32 | 0.95 | 0.63 |
| Â 8-211-010/150L | M12 | 1 | 2 | 1 | 2 | 1.4 | 1 | 1 | 2.1 | 1.5 | 1 |
| Â 8-211-015/185L | M16 | 1.5 | 3 | 1.5 | 3 | 2.1 | 1.5 | 1.5 | 3.1 | 2.2 | 1.5 |
| Â 8-211-025/230L | M20 | 2.5 | 5 | 2.5 | 5 | 3.5 | 2.5 | 2.5 | 5.2 | 3.7 | 2.5 |
| Â 8-211-040/265L | M24 | 4 | 8 | 4 | 8 | 5.6 | 4 | 4 | 8.4 | 6 | 4 |
| Â 8-211-050/340L | M30 | 5 | 10 | 5 | 10 | 7 | 5 | 5 | 10.5 | 7.5 | 5 |
| Â 8-211-080/300L | M36 | 8 | 16 | 8 | 16 | 11.2 | 8 | 8 | 16.8 | 12 | 8 |
| Â 8-211-100/350L | M42 | 10 | 20 | 10 | 20 | 14 | 10 | 10 | 21 | 15 | 10 |
| Â 8-211-150/350L | M42 | 15 | 30 | 15 | 30 | 21 | 15 | 15 | 31.5 | 22.5 | 15 |
| Â 8-211-200/385L | M48 | 20 | 40 | 20 | 40 | 28 | 20 | 20 | 42 | 30 | 20 |
Yoke Rotating swivel Lifting Point Type 211 Metric – Standard
