Sumner Contractor Material Lift – 2112, 2118 & 2124 Models

Sumner 2100 series Contractor Material Lifts are built and designed for the job site to  help move heavy loads safely and easily, Models available depending on Lift Height – 2112, 2118 or 2124 (12ft,18ft or 24ft)

Unmatched as a good all around contractor lift, the Series 2100 Contractor Lift features taller mast to reach desired work heights while requiring fewer mast sections. hence, the 2100 is less expensive and lighter.

The base, forks, winch, etc. are the same as the 2000.

Outriggers are supplied standard with models 2118 and 2124 only

• 12′, 18′ & 24′ heights (3.9 m, 5.6 m, & 7.2 m)
• 650 lb capacity (300 kg)
• Loading Bar – great for overhead cranes
• Pulley Guards prevent cable from coming off
• Reversible forks
• Plunger pins for quick readjustment and compact storage
• No tools needed – no loose parts
• Variety of attachments
• Large 7/32″ (5.5mm) load cable
• Load cable feeds inside mast (no more exposed cable just inches away from operator’s face.)

Standard Features on Sumner 2000 & 2100 Material Lifts

	Sumner-built Winch Highly reliable, single-speed winch uses idler roller to feed four rollers to feed cable evenly on the drum to avoid cable flats		Reversible Forks By pulling plunger pins, forks can be repositioned for added height or just to get flush with the ceiling.
	Lockable 5″ Casters Hard tread urethane wheels with Delrin® bearings.		Fast Action Stabilizer Legs Mounted on base top, stabilizer legs fold down with ease and lock in place. The 2118 and 2124 models come with stabilizer legs ( optional on models 2010, 2015, and 2112).
	Roller Wheels Helps to roll into trucks or vans		Ideal for compact storage No tools or loose hardware to worry about. Leg lock mechanism releases with the push of a button and locks in the stored position. Leg rollers allow lift to be wheeled around. Forks remove by pulling plunger pins.
	10″ Rough Terrain Wheels Makes loading a truck or van hassle free (optional on Series 2000 Lifts).

Series 2100 Contractor Lifts

Options

Cable Stay Brake (#783663) Each mast and carriage can have a factory installed, gravity actuated safety brake which holds loads in place in the event the cable should go slack.
	Pipe Cradle (#783705) Great for duct pipe or other HVAC applications. Slides over standard forks. Packaged in sets of two.
	Boom Carriage (#783642) Ideal for installing pipe or lifting “from the top” applications. Uses four attaching plunger pins and has a 40″ (100 cm) reach. Hook has five locations with load capacities of 650 lbs (300 kg), 525 lbs (240 kg), 425 lbs (195 kg), 300 lbs (135 kg) and 200 lbs (90 kg)

Fork Extensions (#783691)

With the push of a button, forks may be extended from 28″ to 42″ (71–106 cm). With longer forks, the weight capacity decreases to 200 lb (90 kg) and is clearly shown on the forks when extended. A second button returns the extension for convenient storage inside the forks.

Two Speed Winch Handle Kit (Factory Installed #783765)

The two speed winch handle offers a standard speed setting or a high speed setting for quickly positioning forks in half the time. Available only on Series 2100 lifts commencing with serial number 9433. For field installation kit, use part #783761.

Foot Jack (#784070)