Description
Yoke Grade 8 Excavator Weld-on Hook BS EN 1677-1
These Yoke Weld on type lifting hook can be welded to any steelwork and be used as a lifting attachment point following a suitable proof test
Suitable for welding to an excavator to be used as a lifting point
USES
- Designed to be a permanent slinging attachment point for jibs and arms on mobile excavators
- Manufactured from forged alloy steel, quenched and tempered.
- Manufactured and tested in accordance with EN 1677-1.
- Certified by DGUV GS-OA-15-03.
- Load rated parts are 100% magnaflux crack detected.
- Individual forged parts are traceable to Test Certification.
- Proof tested to 2.5 times the WLL.
- Fatigue rated to 1.5 times the WLL.
- Design Factor 5 : 1
DATA SHEET LINK BELOW
YOKE EXCAVATOR WELD ON HOOK SPECIFICATION
METRIC SPECIFICATIONS
| Part Code |
WLL tonnes |
F mm |
H mm |
L mm |
P mm |
T mm |
W mm |
HV mm |
a mm |
Box Quantity |
Mass Kg |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8-081-01 | 1.0 | 25 | 27 | 70 | 18 | 18 | 95 | 7 | 4 | 24 | 0.6 |
| 8-081-02 | 2.0 | 30 | 30 | 85 | 25 | 20 | 115 | 8 | 5 | 18 | 1.0 |
| 8-081-03 | 3.0 | 35 | 30 | 107 | 28 | 23 | 133 | 9 | 6 | 12 | 1.4 |
| 8-081-04 | 4.0 | 42 | 38 | 114 | 28 | 30 | 142 | 10 | 7 | 12 | 2.2 |
| 8-081-05 | 5.0 | 44 | 47 | 135 | 30 | 31 | 167 | 12 | 7 | 6 | 3.0 |
| 8-081-08 | 8.0 | 50 | 52 | 137 | 32 | 39 | 176 | 12 | 8 | 6 | 3.7 |
| 8-081-10 | 10.0 | 56 | 56 | 170 | 44 | 42 | 222 | 13 | 8 | 4 | 6.2 |
IMPERIAL SPECIFICATIONS
| Part Code |
WLL lbs |
F inch |
H inch |
L inch |
P inch |
T inch |
W inch |
HV inch |
a inch |
Box Quantity |
Mass lbs |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8-081-01 | 2,200 | 0.98 | 1.06 | 2.83 | 0.71 | 0.67 | 3.74 | 0.28 | 0.24 | 24 | 1.3 |
| 8-081-02 | 4,400 | 1.18 | 1.22 | 3.46 | 0.98 | 0.79 | 4.53 | 0.31 | 0.31 | 18 | 2.2 |
| 8-081-03 | 6,600 | 1.38 | 1.18 | 4.21 | 1.1 | 0.91 | 5.24 | 0.35 | 0.39 | 12 | 3.1 |
| 8-081-04 | 8,800 | 1.65 | 1.5 | 4.41 | 1.1 | 1.18 | 5.55 | 0.39 | 0.43 | 12 | 4.4 |
| 8-081-05 | 11,000 | 1.73 | 1.81 | 5.24 | 1.18 | 1.22 | 6.57 | 0.47 | 0.51 | 6 | 6.6 |
| 8-081-08 | 17,600 | 1.97 | 2.13 | 5.39 | 1.26 | 1.54 | 6.89 | 0.47 | 0.55 | 6 | 8.4 |
| 8-081-10 | 22,000 | 2.2 | 2.2 | 6.61 | 1.73 | 1.65 | 8.74 | 0.51 | 0.63 | 4 | 13.9 |
We recommend that the working load limit should be reduced to meet any appropriate legislative requirements, if welding on to an excavator.
